The single piece Contractor Hinge Jig is designed for recessing hinges in wooden doors & frames with a plunge router.
Key Features of the Trend HINGE/JIG
- It is easy to use with minimal setting-up time, completing the job both accurately & quickly.
- Used on-site & in joinery shops to increase productivity with excellent results.
- Four apertures for fire door requirements.
- No need for marking out in the conventional way.
- Quick & simple to set-up as the hinge is used as the pattern.
- Clean & accurate recesses are achieved every time. Suitable for timber based doors & square butt hinges.
- Can be used on both inside and outside doors, rebated frames and on maximum 25mm thick fixed stops.
- Use with a light duty plunge router with 1/4 inch collet.
- Long reach router cutter required, 12mm diameter with 70mm overall length.
- Angled position slots to prevent creep.
- Unibase may be needed.
Technical Specifications of the Trend HINGE/JIG
- Length min. 2 5/8" (67 mm)
- Length max. 5" (127 mm)
- Width min. 3/8" (9.5 mm)
- Width max. 1 3/8" (35 mm)
- Width max. in 35mm rebate 20 mm
- Width max. in 44mm rebate 30 mm
- Door sizes possible
- Height min. 6' 5" (1955 mm)
- Height max. 2100 mm*
- Thickness min. 5/8" (16 mm)
- Weight 2.9 kg
- Jig overall length 1957 mm
- Plate thickness 2 mm
- Fixed stop max. thickness 25 mm**
* Please note for doors over 2040mm the bottom hinge will be higher than 9" up.
** Max. hinge leaf width 20mm (35mm doors)
Comes Supplied With
4 x Apertures
2 x Bradawls with spacer
1 x 16mm guide bush
1 x T-Handle hex key 4mm
1 x 4mm spacing gauge
1 x Plastic storage tube
Buy Trend HINGE/JIG Hinge Recessing Jig Single Piece online now from DW Toolshop, one of the UK and Irelands largest tool shops.
